防爆溫度計TP-9 The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves.
防爆溫度計 的詳細介紹
防爆溫度計
防爆溫度計TP-9
The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for
many years. A sealed industrial quality overlay provides a user interface that is easy
to use with gloves. A stainless steel enclosure protects the circuit board and large LCD
from penetration by impact, water and reactive liquids.
The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable
and successful TL1 laboratory thermometer. The Power Button’s primary function powers
the instrument for intervals of about 20 minutes since the last button was accessed. The
Power Button can also be used to conserve power and clear the memory, or to make
adjustment while in calibration mode. A simple menu operation is displayed by holding the
Function Button, and alternately functions to allow adjustments in the calibration mode.
Arrows on the left side of the display show the direction of the temperature reading and
whether stability has been reached. At the user’s discretion stabilized temperatures can
be logged at numerous liquid levels for a running average and later displayed for the user’s
documenting purposes. But this feature never interferes with simply getting an accurate
temperature reading.
To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components.
防爆溫度計TP-9技術參數：
Maximum Dimensions:
10”L x 4.25”H x 6.4” W
Probe
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction
Enclosure Material:
Stainless Steel
Acetal (Delrin) Probe Holder
Polyvinylchloride Faceplate
Stainless Steel Fasteners
Batteries:
2 AA Alkaline; Battery Life of approximately 200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.
Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements
產品規格：
最大尺寸：
10"長x 4.25"高x 6.4" W
Probe探測器
304不銹鋼，密封膠，芳綸纖維增強，FEP或PFA
電纜護套，同軸建設
Enclosure Material:外殼材質：
Stainless Steel不銹鋼
Acetal (Delrin) Probe Holder聚甲醛（聚甲醛）探頭支架
Polyvinylchloride Faceplate聚氯乙烯面板
Stainless Steel Fasteners不銹鋼緊固件
Batteries:電池：
2節AA堿性電池壽命約200小時
電池制造商的電池工作temperatature范圍-4至130°F，-20?54°C
注：電池可能無法提供充足的電力，如果環境溫度極低或極高。
Temperature:溫度：
分辯率：0.01
范圍：-40?+400°F，-40 to +204°C
精確度：
±0.2°F從32到200°F。
±0.5°F從200到400°F。
±0.3°C從100到200°C
4點NIST可追蹤測試報告
長期漂移不超過0.05％/年
符合API要求
操作屬性：
◆易于更換的AA電池，提供的估計200小時運行。
◆邏輯電路會自動顯示電池電量不足時，自動關機二十分鐘后，顯示溫度趨勢和穩定，故障確定顯示的錯誤代碼。
◆低功耗背光，方便夜間操作是為了方便和節約電池的光電傳感器控制。
◆在夜間條件下的背光照明顯示。
◆攝氏或華氏單位C/F的指示可以很容易地從功能按鈕選擇。
◆用戶手冊介紹了直觀的校準程序，可以通過外部的面板按鈕。
典型應用：
托管轉讓，庫存，儲罐，管道，游艇，船舶，軌道車，油罐車（推薦操作：API7，國際油輪和油碼頭安全指南）。
其他應用：
檢驗系統（API 4）
Materials:材料：
所有石化產品，腐蝕性，耐酸，堿，粉末。糖蜜，糖漿，蒸餾酒。
