美國RPS“PRELUDE”202浸漬和觀察系統
“Dip & Look Test” - The Prelude provides precise handling of electronic components for the automated process of a flux and solder dip of the component terminations. After the dip process, the operator inspects the terminations (i.e., “look”) for the adequate presence of solder. If adequate, the component is validated for authenticity and solderability with the selected solder alloy.
“浸漬和觀察”可焊性測試儀 - “前奏”202可焊性測試儀能夠在零件終端浸漬助焊劑和焊錫的自動化加工工序里面準確地對電子零件進行輸送。浸漬之后，工人可以對終端進行檢查(那就是“觀察”)，確認焊錫浸漬是否合格。如果合格，就證明零件對所選擇的焊錫合金是真實的、可焊的。
BENEFITS
優點
Easy Set-up & Immediate Results
容易設置，立馬可用
Precise Process Control & Repeatability
工藝控制準確，可重復性高
Superior Results vs Hand Dipping
比手工浸漬更加優越
Large Solder Bath Maintains Thermal Mass
焊錫槽非常大，保證不會斷料
Space-Saving Footprint
體積更加緊湊，節省廠房空間
No Programming Knowledge Required
不需要編程知識
Meets IPC, ANSI, Mil Specifications
符合IPC、ANSI、Mil等標準的要求
COMBINE WITH STEAM AGER FOR FULL TEST OFFERING
與蒸汽老化試驗機一起形成一個更加全面的測試系統
The Prelude can be combined with an RPS Cadence Steam Ager to provide artificial aging prior to the dip and look test. The combination of aging and dip & look testing provides full compliance with the objective IPC, ANSI and MIL solderability test standards.
“前奏”202可焊性測試系統與RPS的“節奏”蒸汽老化試驗
機讓我們能夠在浸漬和觀察之前對零件進行人工老化試驗。
這種老化與浸漬和觀察相結合的方式更加全面符合IPC、ANSI、MIL等標準的要求。
FEATURES & OPTIONS *
特點和可選方案 *
PID Temperature Controls
PID溫度控制系統
Solder Station & Flux Station
一個焊錫系統和一個助焊劑系統
DX with 2nd Alloy Station
具有兩個焊錫爐的DX雙焊劑可焊性測試系統
Multi-Axis Motion Control
多軸運動控制系統
Automatic Dross Wiper
自動控制的焊渣刮
High Precision | ± .001”
精度高達±0 .001”
Prelude 202 Solderability Test System | The Prelude 202 is designed for standards compliant solderability “dip & look” testing of electronics components. The Prelude 202 features high precision PLC motion X & Z axis motion control, advanced touch screen programming, a solder pot and flux station. Customer must select and purchase tooling to hold components. NOTE: System is designed to industry standard using static solder pot and testing of a sample of component terminations (leads). Testing all terminations (especially, fine pitch, QFN, QFP components) may require N2 inertion and a dynamic solder pot, which are inconsistent with testing standards.
“前奏”202可焊性測試系統用于對電子零件進行“浸漬和觀察”測試，看是否符合標準規定的可焊性要求。“前奏”202可焊性測試系統的特點是：高度精密的X軸和Z軸PLC運動控制機構；先進的觸摸屏編程系統；具有一個焊錫爐系統和一個助焊劑系統。客戶必須另行選購夾持零件的模具。備注：該系統是根據靜態焊錫爐和單一零件終端(腳)測試要求的行業標準來設計的。如果需要測試的是所有零件終端(特別是小腳距、QFN、QFP等零件)，也許還需要氮氣惰化裝置、動態焊錫爐等非標準配件。
